External Panels, structure of galvanized steel, 100 mm width with an exterior rigid OSB Board of 9 mm ( steel studs are of 0.89 mm thick, attached every 0.40 mts).
Internal walls, with wall studs applied in crosses as rigidizing plaques (steel studs of 0.89 mm thick, attached every 0.40 mts). Panels of 2.53 mts height attached to a floorbeam of 0.1 mts which results in final total height of 2.63 mts).
Mainframe rafters are to be mounted every 0.40 mts from each other. Mainframe rafters are construed with the same steel framing as partition walls.
Single items delivered to construction site
- OSB Boards of 12 mm to apply as base to the roof.
- Vapour control membrane to wrap up the whole house and the roof.
- Pressurizing bomb.
- Glassfibre of 50 mm thick to isolate the whole house including the attic,
- Plaster plaques to panel the complete house interior with its corresponding amount of putty and ribbon strip.
- Metallic roof panels made of metal tiles or corrugated sheet, according to the proyect.
- High performance steelsiding for the exterior and wood for internal doors ( plaques).
- Water installation by thermofussion system.
- Materials for electric installation (IRAM CERTIFIED)
- Bathroom items ( toilet, bidet, sink, bathtub, massage bathtub etc) according to the proyect ( First line).
- Floor tiles and wall tiles according to the proyect.
- First line faucet water.
- External plaques to be applied on panels.Elastoplastic coating.
- Wall Coating to be applied on top of the external plaques, according to the proyect.
- Hardware and accessories included.
- Kitchen furniture (according to the proyect).
- Worktops and basins.
- Stove oven, hot water heater, range hood according to the proyect.
All other particulars according to the kit.
